FORD Explorer Strut bearing replacement

The cost varies by year, engine size, and your location. Use the estimator above for an accurate breakdown of parts and labour specific to your FORD Explorer.

Common parts for this repair include: Strut bearing / top mount bearing.

Strut bearing replacement on a FORD Explorer typically takes 1.5–4 hours of labour at a garage.

For a FORD Explorer, strut bearing replacement is typically needed every 50,000–75,000 miles or when handling or ride quality noticeably deteriorates.

Strut replacement legitimately costs more than simple shock absorber work because the spring must be compressed and transferred, and a wheel alignment is mandatory afterwards. Always confirm the alignment is included or separately priced. A complete strut assembly (pre-assembled with spring and mount) costs more in parts but saves spring compression labour — ask which option the garage is quoting. A wheel alignment should always follow strut replacement; if it is not mentioned in the quote, it is either missing or hidden.

An independent with proper spring compressor equipment and wheel alignment capability is the right choice. The most important post-replacement step is a 4-wheel alignment — without it, tyre wear and handling will be off. Confirm the garage has an alignment rig before booking. Dealers charge a significant premium for strut work with no quality advantage. If your FORD has adaptive or electronically controlled dampers, confirm the independent can handle the calibration procedure required after replacement.

Yes — complete aftermarket strut assemblies from Monroe, KYB, Gabriel and Bilstein are widely used and often a better value than OEM. Monroe Quick-Strut and KYB Strut-Plus assemblies come pre-assembled with a new spring, mount and bearing, eliminating spring compression work at the garage (reducing labour time). Match the specification to your FORD's original ride tuning: a comfort-oriented family FORD needs a standard-valved replacement, not a firm performance variant. Bilstein B4 is the closest to OEM feel; Bilstein B6 gives a perceptibly firmer, more controlled ride.

A strut (MacPherson strut) is a structural suspension component that combines the damper, spring mount and steering pivot into one unit. A shock absorber is only the damping element — the spring is separate. On strut-equipped vehicles, replacing the strut requires compressing and transferring the spring (or buying a complete pre-assembled unit), making it more labour-intensive. Shock absorbers can be replaced in under an hour per corner; strut replacement typically takes 2–3 hours per pair plus alignment time. Most front-wheel drive FORD models use struts at the front and separate shocks at the rear.

At 1.5–4 hours of labour this repair requires a solid level of mechanical knowledge and the proper tools. Most owners prefer to use a professional to ensure the job is done correctly and backed by a parts-and-labour warranty.