FORD F-150 Super Crew Brake caliper replacement

The cost varies by year, engine size, and your location. Use the estimator above for an accurate breakdown of parts and labour specific to your FORD F-150 Super Crew.

Common parts for this repair include: Brake caliper repair kit (seals, boots).

Brake caliper replacement on a FORD F-150 Super Crew typically takes 1.2–3.5 hours of labour at a garage.

For a FORD F-150 Super Crew, brake caliper replacement is typically needed as needed—calipers typically last 75,000–100,000 miles but may seize earlier in wet or salty climates.

A remanufactured caliper for most family cars costs $60–$150 per corner; new OEM calipers cost more. Labour is typically 1–2 hours per corner, which should include a brake system bleed. If a garage recommends replacing all four calipers at once, ask for evidence — calipers usually seize on one corner at a time. Also ask whether a rebuild (new seals and pistons) was considered; on some vehicles a rebuild kit costs $20–$40 and restores the caliper to full function at a fraction of the replacement cost.

An independent specialist is the better choice for caliper work on most FORD vehicles. Remanufactured calipers from quality suppliers (ATE, Brembo, Bosch) meet OEM specifications and cost significantly less than dealer parts. The one exception is performance or multi-piston calipers on high-end FORD models, where an independent who specialises in that marque will have the right tooling and experience without the dealer premium.

Remanufactured calipers are the standard choice for most independent garages and are a sound option. Quality remanufacturers (ATE, Brembo, TRW) disassemble, clean, re-bore and reassemble calipers to OEM tolerances with new seals and pistons. The key is to avoid very cheap calipers from unknown suppliers — low-quality castings can have porous walls that leak under pressure. For most FORD models, a mid-range remanufactured caliper offers excellent value without compromising braking safety.

Worn brake pads reduce braking effectiveness gradually and produce squealing from the wear indicators. A seized caliper causes the pads on one wheel to stay pressed against the rotor permanently — the symptoms are uneven braking (pulling to one side), that one wheel overheating after a normal drive, and one-sided pad wear where one side is much thinner than the other. A seized caliper is a safety issue that requires immediate attention; worn pads can be monitored and planned for during the next service.

Brake repairs are safety-critical. Experienced home mechanics can replace pads and rotors, but the work must be done carefully with correct torque settings and bedding-in procedure. It is strongly recommended to have any brake repair verified by a professional before driving at speed.