FORD F-150 Super Crew Spark plug replacement

The cost varies by year, engine size, and your location. Use the estimator above for an accurate breakdown of parts and labour specific to your FORD F-150 Super Crew.

Common parts for this repair include: Spark plug, Spark plug.

Spark plug replacement on a FORD F-150 Super Crew typically takes 0.5–1.5 hours of labour at a garage.

For a FORD F-150 Super Crew, spark plug replacement is typically needed every 30,000 miles for copper plugs; every 60,000–100,000 miles for iridium or platinum plugs.

Iridium or platinum spark plugs for most cars cost $8–$25 each; a 4-cylinder needs 4 plugs, a V6 needs 6. Labour should be 30–60 minutes for most accessible engines; some engines (e.g. those requiring intake manifold removal) legitimately take 2–3 hours. If you're quoted more than $250 for a 4-cylinder with accessible plugs, ask for the labour time breakdown. A common upsell is replacing ignition coils at the same time — unless a coil is actually faulty (showing as a misfire code), this is not necessary at every plug change.

Independent garages are the right choice for spark plugs on almost all FORD models. The correct plug specification is in the owner's manual and any independent can source the exact NGK, Denso, Bosch or Champion equivalent. The one exception is direct-injected FORD engines where access requires intake manifold removal — confirm the independent has the correct socket set for your specific plug size before booking, as the plugs can shear if the wrong tool is used on a stuck plug.

Yes — this is one of the easiest parts to source correctly as aftermarket. NGK, Denso, Bosch and Champion manufacture the original equipment plugs for most FORD vehicles (often with different part numbers on the same plug). Match the heat range, thread pitch, seat type and electrode tip material to the OEM specification. Iridium plugs are worth the premium over copper — they last two to three times longer and maintain a sharper electrode tip that keeps ignition efficiency high over the service life. Avoid cheap plugs with no brand name; correct heat range is critical to engine health.

Spark plugs are the wear items that ignite the air-fuel mixture — they are replaced on a schedule (30,000 miles for copper, 60,000–100,000 for iridium). Ignition coils supply the high voltage to fire the plugs — they are not a scheduled item and are replaced when they fail. Both cause the same symptom (engine misfire) but a diagnostic scan will distinguish them: a coil fault shows as a specific coil code, while a worn plug shows as a random misfire. Replacing plugs when a coil is faulty will not fix the misfire; the correct diagnosis saves money on parts that are not needed.

At 0.5–1.5 hours of labour this is a relatively straightforward repair. A competent home mechanic with the right tools could attempt it, but a professional will road-test the car and inspect surrounding components to make sure everything is in order.