NISSAN Micra 5 Doors Brake pad replacement

The cost varies by year, engine size, and your location. Use the estimator above for an accurate breakdown of parts and labour specific to your NISSAN Micra 5 Doors.

Common parts for this repair include: Brake pad set (front), Brake pad set, Brake pad set (rear), Brake pad wear sensor.

Brake pad replacement on a NISSAN Micra 5 Doors typically takes 0.8–2.5 hours of labour at a garage.

For a NISSAN Micra 5 Doors, brake pad replacement is typically needed every 30,000–50,000 miles, or sooner when thickness falls below 3 mm.

Ask for an itemised quote showing parts cost and labour separately. Front brake pads on most cars cost $30–$80 for quality aftermarket, $60–$150 for OEM. Labour should be 1–2 hours per axle. Red flags: being quoted for four-wheel pad replacement when only one axle shows wear, or being told rotors must be replaced when they are within specification. Always compare the quote against RepairFair's estimate for your specific NISSAN model.

Brake pad replacement is a routine job that any competent independent garage can perform to the same standard as a dealership — using the same or equivalent quality parts. Dealerships typically charge 30–60% more in labour. The only scenario where a dealer is preferable is if the car is under warranty and the brake issue may be a warranty claim. For a straightforward pad replacement outside warranty, a reputable independent is the better value choice.

Yes — quality aftermarket brake pads from brands like Bosch, Brembo, EBC or Hawk are widely used and perform at least as well as OEM pads for everyday driving. Avoid ultra-cheap unbranded pads; they often contain inferior friction compounds that fade under heat and wear rapidly. For track or performance driving, a higher-grade compound (EBC Yellowstuff, Ferodo DS series) is worth the premium. For normal road use, quality aftermarket pads are a sensible and cost-effective choice.

Brake pads are the friction material that clamps against the rotor — they wear down deliberately and are a consumable item replaced every 30,000–50,000 miles. Brake rotors are the metal discs the pads clamp against; they last two to three times longer. When pads are worn through completely, they score the rotor surface, often making rotor replacement necessary too. If a garage recommends both, ask to see the rotor thickness measurement — rotors should only be replaced if they are below the manufacturer's minimum thickness specification.

Brake repairs are safety-critical. Experienced home mechanics can replace pads and rotors, but the work must be done carefully with correct torque settings and bedding-in procedure. It is strongly recommended to have any brake repair verified by a professional before driving at speed.