SUBARU Mini Jumbo Control arm replacement Cost
1988–1991 · Engine, Fuel & Emissions system
Typical range
$291–$2.5k
Parts + labour
Labour hours
1.5–4.5h
At a typical garage
Control arms connect the wheel hub to the chassis and contain bushings and often a ball joint; worn bushings cause clunking, vibration through the steering wheel and imprecise handling. Replacement typically includes new bushings or a complete arm. SUBARU Mini Jumbo control arm replacement costs $291–$2542 plus alignment.
Typical parts included
- Control arm (wishbone) – front
- Control arm – rear
- Control arm bushing
What affects the price
- Whether the full arm or just the bushings are replaced (separate bushings are cheaper but more labour-intensive)
- Front vs rear and upper vs lower arm position
- Wheel alignment required afterwards
Common questions
How long does this repair take?
Control arm replacement on a SUBARU Mini Jumbo typically takes 1.5–4.5 hours at a garage.
How often does this need to be done?
For a SUBARU Mini Jumbo, this is typically needed as needed—typically every 80,000–150,000 miles; bushings wear before the arm itself.
Other engine, fuel & emissions system repairs on the SUBARU Mini Jumbo
- ABS hydraulic unit replacement$340–$587
- ABS sensor replacement$140–$242
- ABS system bleeding$112–$193
- AC compressor clutch replacement$280–$483
- AC compressor replacement$300–$518
Control arm replacement cost on similar cars
- NISSAN Micra 5 Doors$240–$414
- RENAULT Clio 5 Doors$240–$414
- KIA Picanto$240–$414
- MINI Hatch$240–$414
- FIAT 500$240–$414
Get the exact price for your SUBARU Mini Jumbo
Prices vary by year, engine and location. Tell us about your specific car.
Get my price estimate →